Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Is IEC 61850?

IEC 61850 is the international standard for communication in electrical substations, defining a common data model for protection and control devices and three very different message types that run over Ethernet.

Illustration for the cybersecurity term IEC 61850
Home / Blog / Cybersecurity Terms / What Is IEC 61850?
17 November 2026

What Is IEC 61850?

What Is IEC 61850?

Before IEC 61850, every substation was a translation exercise. Protection relays from one manufacturer, a control system from another, and a remote terminal unit in the middle converting between proprietary protocols, with the engineering effort repeated at every site. IEC 61850 replaced that with a standard data model and a standard set of services, so that a circuit breaker is described the same way regardless of who built the relay controlling it.

It is now the backbone of substation automation worldwide, and in Great Britain it underpins the transmission and distribution substation refurbishment programmes that are replacing electromechanical and early digital equipment.

The Model and the Configuration Language

Everything is modelled as logical nodes with standardised names. A circuit breaker is XCBR, a measurement unit is MMXU, a distance protection function is PDIS. Those nodes hold data objects with defined semantics, so an engineer or a tool knows that a given attribute is a breaker position and not a manufacturer-specific integer.

Alongside the model is the Substation Configuration Language, an XML format describing the devices, their capabilities, and the data flows between them. A substation’s SCD file is the authoritative description of the installation, and for a security team it is simultaneously the best asset inventory available and a document that should not be left on a contractor’s laptop, since it describes the entire protection scheme.

Three Message Types, Three Security Positions

Security differs sharply between them. MMS can be protected conventionally. GOOSE and Sampled Values cannot, because their timing budgets leave no room for cryptographic processing in a conventional implementation, and because they are publish-subscribe with no concept of a trusted sender. A device that can place frames on the station bus can publish GOOSE claiming to be any publisher, and subscribers that accept a higher state number will act on it. Researchers have demonstrated trip commands injected this way, and the malware described under Industroyer included a module that spoke IEC 61850 natively, enumerating devices and changing breaker states without touching an operator workstation.

What IEC 62351 Adds

Security for the IEC 61850 family is specified separately in IEC 62351. The relevant parts are 62351-3, which applies TLS to the TCP profiles including MMS; 62351-4, which adds application-level security; 62351-6, which defines authentication for GOOSE and Sampled Values, using message authentication codes designed to fit the latency budget; and 62351-9, which handles key management, the part that makes or breaks any of it in a thousand-substation estate.

Adoption is uneven. TLS on MMS is achievable today. Authenticated GOOSE requires device support, careful performance validation, and a key distribution mechanism that must work in substations with intermittent connectivity. Most utilities therefore rely on architecture: the station bus and process bus are physically separate networks within a locked building, with no path from anywhere else, and the conduit to the control centre is tightly filtered. That is a sound position provided the engineering access path is held to the same standard, which is where assessments usually find the gap.

Practical Priorities

  1. Treat the SCD file as sensitive, with version control, access restriction, and a record of which contractors hold copies.
  2. Separate the station bus, process bus, and any site services network, and do not permit a general-purpose laptop onto the first two.
  3. Control engineering access: individual accounts on relays, a monitored remote access path for vendors, and logging of settings changes.
  4. Monitor GOOSE state and sequence numbers; an unexpected state number increment or a duplicate publisher is a high-confidence detection, and this is one of the cases where OT anomaly detection maps neatly onto protocol semantics.
  5. Apply TLS to MMS where devices support it, and plan 62351-6 adoption into the next relay replacement cycle rather than as a retrofit.
  6. Place the whole substation in a security zone with a defined target level under IEC 62443-3-3, and the control centre link in a defined conduit.

In the United Kingdom, substation operators are regulated under the NIS Regulations 2018 with Ofgem as competent authority, assessed against the NCSC Cyber Assessment Framework, so the integrity of protection and control communications is a regulated outcome. At Privia Security, we assess substation automation architectures through our OT-SCADA Penetration Test.

FAQ – Frequently Asked Questions

What Is GOOSE and Why Is It Hard to Secure?

GOOSE is the Generic Object Oriented Substation Event message, a multicast Ethernet frame used for fast peer-to-peer signalling between protection devices, with a performance target of a few milliseconds. It has no IP layer, no connection, and no sender authentication in the base standard, and its timing budget leaves little room for conventional cryptography, so most protection against spoofing comes from network isolation.

Is IEC 61850 Less Secure Than Older Protocols?

Not inherently, but it changes the exposure. Older schemes used dedicated copper and proprietary serial links that required physical presence. IEC 61850 puts protection signalling on Ethernet with a published, well-documented model, which makes an attacker who reaches the station bus far more capable. The standard also makes the installation self-describing, which cuts both ways.

What Is an SCD File and Why Does It Matter?

The Substation Configuration Description is the XML file defining every device, data flow, and GOOSE subscription in a substation. For engineers it is the single source of truth; for a security team it is both an excellent asset inventory and a highly sensitive document, because it describes the entire protection scheme. It belongs under version control with restricted access.

Do I Need IEC 62351 to Comply With UK Regulation?

No standard is mandated by name. The NIS Regulations require appropriate and proportionate measures, assessed against outcomes in the NCSC Cyber Assessment Framework. IEC 62351, alongside strong network separation and access control, is one credible way of demonstrating the communications integrity outcome, and regulators respond well to a documented adoption plan tied to the asset replacement cycle.

Related Terms

You May Be Interested In These

What Is a Honeynet?

Cybersecurity Terms

17 November 2026

What Is a Honeynet?

Read More
What Is Spring4Shell?

Cybersecurity Terms

17 November 2026

What Is Spring4Shell?

Read More
What Is KVKK Data Breach Notification?

Cybersecurity Terms

17 November 2026

What Is KVKK Data Breach Notification?

Read More