Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
IEC 62443-3-3 sets out the system security requirements for an industrial automation and control system, organised under seven foundational requirements and mapped to four security levels.

What Is IEC 62443-3-3?
Of all the documents in the IEC 62443 series, 3-3 is the one that gets printed and left on a desk. It answers the question an engineer actually asks: given that this zone needs to resist a particular kind of adversary, what must the system be able to do? It does that by listing system requirements, grouping them under seven headings, and tying each one to a security level.
Everything in the document hangs off seven categories, usually written as FR1 to FR7:
The ordering is deliberate and tells you something. Confidentiality is fourth of seven, and availability closes the list as the requirement that underpins everything else in a plant. An IT practitioner reading the document for the first time should notice that.
Under each foundational requirement sit numbered system requirements, each written as a capability the system must provide, and most with one or more requirement enhancements that raise the bar. Familiar examples include SR 1.1 on human user identification and authentication, SR 1.5 on authenticator management, SR 2.1 on authorisation enforcement, SR 3.1 on communication integrity, SR 3.4 on software and information integrity, SR 5.1 on network segmentation, SR 5.2 on zone boundary protection, SR 6.1 on audit log accessibility, SR 7.1 on denial of service protection, SR 7.3 on control system backup, and SR 7.4 on recovery and reconstitution.
The requirement enhancements are what distinguish one security level from the next. SR 1.1 at level 1 means users are identified and authenticated. The enhancements add multi-factor authentication for untrusted networks at the next level, and for all interfaces at the level above. The document’s central table maps every requirement and enhancement to the levels at which it applies, which is the part people photograph.
The four levels are defined by adversary capability rather than by control count: casual or coincidental violation at SL 1; intentional violation with simple means and low resources at SL 2; sophisticated means, moderate resources, and system-specific skills at SL 3; and extended resources with high motivation at SL 4.
Because the seven foundational requirements are independent, a zone’s target is expressed as a vector rather than a single number, for instance SL-T (2,2,2,1,3,2,2). That notation lets a design say what it really means: restricted data flow matters most here, and confidentiality matters least. Three variants are used in practice. SL-T is the target derived from risk assessment in 62443-3-2. SL-C is the capability a product or system can provide, which suppliers state in their documentation. SL-A is what is actually achieved on site once everything is configured, patched, and operated, and the gap between SL-C and SL-A is the subject of most assessments.
For boundary requirements under FR5, hardware-enforced options such as a data diode are one way to demonstrate a high achieved level on a one-way conduit, and conventional network segmentation covers the rest. The companion documents are described under IEC 62443 and IEC 62443-4-1.
At Privia Security, we carry out zone-level assessments against these requirements through our Regulation and Compliance Services.
A seven-element notation giving the security level for each foundational requirement in a zone, written for example as (2,2,2,1,3,2,2). It exists because the seven areas are independent: a zone may need strong restricted data flow and weak confidentiality. Vectors come in target, capability, and achieved forms, and comparing the capability of installed equipment against the target is the core design activity.
3-3 states what a system must be able to do within a zone; 4-2 states what an individual component, such as a controller, application, or network device, must provide. The two are aligned requirement by requirement. Use 3-3 for design and assessment of an installation, and 4-2 for writing procurement specifications and evaluating supplier claims.
Often not directly, and the standard anticipates that. Where a device cannot provide a required capability, the zone may still achieve its target level through compensating countermeasures, such as boundary enforcement, protocol filtering, monitoring, or physical control, provided the reasoning and residual risk are documented. This is the mechanism that makes the standard usable on plants built decades ago.
No standard is mandated by name. UK operators of essential services are assessed against outcomes in the NCSC Cyber Assessment Framework. A documented 62443 zone and conduit model with per-zone requirement assessments is one of the most convincing ways to evidence those outcomes in an industrial environment, and sector regulators are generally familiar with the notation.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.