Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
Proxmark3 is a research device for RFID and NFC systems that can read, analyse, emulate, and clone contactless cards, making it the standard tool for testing access control.

What Is Proxmark3?
Proxmark3 is a handheld radio device built for working with contactless cards at the protocol level. It can read a credential, record the raw signal, replay it, emulate a card to a reader, emulate a reader to a card, and in many cases recover the keys that were supposed to protect the data. For anyone assessing building access control, it is the reference tool.
The design dates back to research published by Jonathan Westhues in 2007. Development since then has been community-driven, with the Iceman firmware fork and the RDV4 hardware revision now the usual combination. The device is openly sold, costs a few hundred pounds, and is as useful to a facilities team auditing its own badges as it is to an attacker.
| Band | Typical technologies | Security position |
|---|---|---|
| 125 kHz low frequency | HID Prox, EM410x, Indala, AWID | No cryptography at all; the card broadcasts a fixed number |
| 13.56 MHz high frequency | MIFARE Classic, MIFARE DESFire, iCLASS, NTAG, SEOS | Ranges from thoroughly broken to genuinely strong |
The low-frequency case is stark. A legacy proximity card contains a static identifier and nothing else, so reading it and writing it to a blank card is a matter of two commands. There is no key to recover because there is no key. Any building still running 125 kHz badges should treat its access control as an inventory list rather than a security control.
High frequency is more varied. MIFARE Classic uses the proprietary Crypto1 cipher, which academic researchers broke comprehensively between 2008 and 2009; the darkside and nested attacks implemented in Proxmark3 firmware recover sector keys in seconds to minutes. Older iCLASS deployments have known key weaknesses. By contrast, MIFARE DESFire EV2 and EV3 and HID SEOS use AES with mutual authentication and diversified per-card keys, and are not clonable by reading a card in a corridor.
In an authorised assessment, the work runs in a predictable order. The tester identifies what technology the site uses, either from the reader model or by presenting a card to the device. They then determine whether the credential is readable at a distance, whether the data is protected, and whether a working duplicate can be produced on a blank or on a programmable emulator card.
Range is the detail that surprises clients. A Proxmark3 held close to a pocket reads most low-frequency cards, and purpose-built long-range readers concealed in a bag or a clipboard extend that considerably. The practical implication is that a badge hanging on a lanyard in a coffee shop near the office is readable without the holder noticing.
Findings normally feed into a wider physical penetration test, because a cloned badge is only interesting if it opens a door that leads somewhere. Related work covers reader tamper detection, NFC and RFID security in general, and the Wiegand wiring between reader and controller, which is unauthenticated in older installations and can be attacked with implants placed behind the reader.
Owning a Proxmark3 is lawful. Using it on credentials you do not own is not: copying another person’s access card to enter premises engages the Fraud Act 2006 and the law of trespass, and if the card is used to reach a computer system, the Computer Misuse Act 1990 applies as well. Professional engagements carry written authorisation naming the sites, the credential types in scope, and a client contact reachable at any time.
Our Hardware Penetration Test Services cover card and reader technology alongside the rest of your physical security estate.
No. Legacy 125 kHz proximity cards and MIFARE Classic badges are copied easily, because they either have no cryptography or use a cipher that was broken over a decade ago. Modern credentials such as MIFARE DESFire EV2 and EV3 or HID SEOS use AES with mutual authentication and diversified keys, and cannot be duplicated by reading them.
With a standard Proxmark3 antenna, a few centimetres, which usually means brushing past or standing close in a lift. Purpose-built long-range readers hidden in a bag or a folder extend that to tens of centimetres for low-frequency cards. That is enough to capture a badge from a pocket or a lanyard without the holder being aware of it.
Yes. It is openly sold research equipment used by security teams, access control integrators, and academics. The legal risk attaches to use: reading or copying a credential that is not yours, or entering premises with a duplicate, engages the Fraud Act 2006, trespass, and potentially the Computer Misuse Act 1990. Authorised testing requires written permission from the site owner.
Credentials that authenticate mutually with the reader using AES and site-specific diversified keys, such as MIFARE DESFire EV3 or HID SEOS. Insist that the installer generates keys unique to your site rather than using defaults, upgrade readers to OSDP with secure channel so the wiring cannot be tapped, and require a second factor on doors protecting critical areas.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.