Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Is Substation Automation Security?

Substation automation security protects the protection relays, intelligent electronic devices, and IEC 61850 communications that switch and protect the electricity network.

Illustration for the cybersecurity term Substation Automation Security
Home / Blog / Cybersecurity Terms / What Is Substation Automation Security?
17 November 2026

What Is Substation Automation Security?

What Is Substation Automation Security?

A substation transforms voltage and switches circuits, and the equipment that decides when to switch is now digital. Protection relays, bay controllers, merging units, and a station computer exchange messages over Ethernet instead of through copper wiring, following the IEC 61850 standard. Substation automation security is the protection of that digital layer, and it is the single most consequential area of electricity cybersecurity, because a substation is where the decision to open a circuit breaker is actually made.

Everything above it, including the control centre and the SCADA layer described under SCADA security, issues requests. The substation acts.

What IEC 61850 Introduced

The standard’s original design assumed a physically secure, isolated station network. GOOSE and Sampled Values have no built-in authentication in their base form and are extremely sensitive to timing, which constrains what security can be added without breaking the protection function.

The Attack Surface

  1. GOOSE spoofing. An attacker on the station bus can publish forged messages with a higher state number than the genuine publisher, causing subscribing devices to act on false information, including spurious trips or suppressed protection.
  2. Sampled Values injection, feeding false current and voltage measurements so that protection misoperates.
  3. Engineering access. Relay configuration software can change protection settings, which is the most damaging possible action and usually requires only a laptop on the right network.
  4. Remote access paths installed for vendor support or for settings changes, frequently permanent and often shared across many substations.
  5. Time synchronisation. Protection and Sampled Values depend on precise timing, commonly from satellite sources with no authentication, so spoofed time can disrupt protection and corrupt event records.
  6. Supply chain and firmware, where devices are installed for twenty years and updates require an outage and revalidation.

What Industroyer Demonstrated

In December 2016, malware later named Industroyer caused a power outage in Kyiv. Its significance was architectural: it included protocol modules for IEC 60870-5-101, IEC 60870-5-104, IEC 61850, and OPC Data Access, meaning it could discover and command grid equipment directly rather than driving an operator’s console remotely, as the 2015 Ukrainian attack had done. It also carried a wiper and a module exploiting a known denial of service flaw in a protection relay.

Industroyer2, deployed against a Ukrainian energy company in April 2022 and disrupted before it could take full effect, was tailored to the specific high-voltage substations of that operator, with device addresses and configuration embedded in the binary. That tailoring is the important detail: the attackers had obtained the station configuration, which means the reconnaissance phase had succeeded long before the attack phase began.

Controls That Work in a Substation

The UK Position

Transmission and distribution operators in Great Britain are operators of essential services under the Network and Information Systems Regulations 2018, with Ofgem as competent authority and assessment against the NCSC Cyber Assessment Framework. Connection and operation obligations under the Grid Code sit alongside, and the long-running substation digitisation programmes mean the installed base is shifting from conventional to digital stations over an extended period, so operators have to secure both at once.

Our OT-SCADA Penetration Test covers digital substations using passive capture, configuration review, and testing against spare or replica equipment, with live work only where the operator can tolerate it.

FAQ – Frequently Asked Questions

Can GOOSE Messages Be Authenticated?

IEC 62351 defines authentication for GOOSE and Sampled Values, and newer devices support it, but the timing budget is tight and mixed estates complicate deployment because every publisher and subscriber in a group must agree. Many operators therefore rely on strict network isolation and monitoring for the existing estate, and specify authentication support as a procurement requirement for new equipment.

Why Is the Station Configuration File So Sensitive?

It describes every device, signal, and interlock in the substation, which is exactly what an attacker needs to act precisely rather than destructively. Industroyer2 was tailored to its target’s specific substations, implying the configuration had been obtained first. Treat these files as high-value secrets, control who can export them, and include vendors and consultants in that control.

Is a Digital Substation Less Secure Than a Conventional One?

It has a larger attack surface and better visibility. Hard-wired protection cannot be reconfigured over a network, but it also offers no logging, no anomaly detection, and no rapid reconfiguration during restoration. The digital station is defensible if it is treated as a security zone from the design stage; the risk arises when it is treated as a wiring replacement.

What Should We Monitor on a Station Network?

New GOOSE publishers, unexpected changes in state and sequence numbers, MMS write and control operations, configuration downloads, any device appearing that is not in the inventory, and disagreement between time sources. Passive capture on a mirror port gives all of it without touching the protection function, and it is the most productive first step in a substation security programme.

Related Terms

You May Be Interested In These

What Is Multi-Account Cloud Architecture?

Cybersecurity Terms

17 November 2026

What Is Multi-Account Cloud Architecture?

Read More
What Is a Trust Boundary?

Cybersecurity Terms

17 November 2026

What Is a Trust Boundary?

Read More
What Is Data Poisoning?

Cybersecurity Terms

17 November 2026

What Is Data Poisoning?

Read More