Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Was the Mirai Botnet?

Mirai assembled hundreds of thousands of cameras and routers by guessing 61 default passwords, then used them to knock major internet services offline in 2016 and reshaped IoT security law.

Illustration for the cybersecurity term Mirai Botnet
Home / Blog / Cybersecurity Terms / What Was the Mirai Botnet?
17 November 2026

What Was the Mirai Botnet?

What Was the Mirai Botnet?

Mirai was a piece of malware that turned consumer internet-connected devices into a distributed denial-of-service weapon. It did not exploit a memory corruption bug or a zero-day. It connected to Telnet on ports 23 and 2323 and tried a list of 61 username and password pairs that manufacturers had shipped as defaults, including root/xc3511, root/vizxv, and admin/admin. Enough devices answered that the botnet reached hundreds of thousands of nodes.

The victims were digital video recorders, IP cameras, and home routers, mostly built around components from a handful of original design manufacturers. Many had no mechanism for the owner to change the credential at all, because it was hard-coded in the firmware.

Three Attacks That Made the Point

The Dyn incident mattered beyond its size. It showed that attacking a shared dependency produces far more damage than attacking any single target, a lesson that now sits at the centre of supply chain attack thinking.

How the Code Worked

Mirai ran entirely in memory, so a reboot cleaned the device, and it immediately killed competing malware and shut down Telnet to keep rivals out. Each infected node scanned random addresses, reported working credentials to a loader server, and awaited instructions over a simple command protocol. Attack modes included SYN and ACK floods, UDP floods, GRE flooding, and a DNS water torture technique that generated random subdomain lookups to exhaust an authoritative server.

On 30 September 2016, the author published the source code on a criminal forum under the alias Anna-senpai. That decision created the problem that persists today: dozens of derivative families, including Satori, Okiru, Masuta, Mozi, and more recent variants, descend from that release.

Who Built It, and the British Connection

The original authors were not a nation state. Paras Jha, Josiah White, and Dalton Norman pleaded guilty in December 2017; the botnet began as a tool to attack Minecraft server hosts and a DDoS mitigation market they hoped to profit from.

The UK saw a Mirai variant directly. In November 2016, a strain exploiting a flaw in the TR-064 management protocol on port 7547 knocked roughly 900,000 Deutsche Telekom customers offline. Its operator, Daniel Kaye, was convicted in Germany in 2017 and later prosecuted in the UK over attacks on Lloyds Bank and Barclays and a commercially motivated campaign against a Liberian mobile operator. He was sentenced at Blackfriars Crown Court in January 2019 to two years and eight months.

What Changed in Law and Guidance

Mirai is the reason product security moved from voluntary advice to statutory requirement in the UK. The Product Security and Telecommunications Infrastructure Act 2022 brought security requirements into force on 29 April 2024. Manufacturers, importers, and distributors selling consumer connectable products in the UK must now ban universal default passwords, publish a vulnerability disclosure contact, and state a minimum security update period. The requirements mirror the first three provisions of ETSI EN 303 645, the European consumer IoT baseline, and the EU Cyber Resilience Act takes a similar direction.

Practical Defence Today

Where devices are embedded in a product or a building, firmware-level assessment answers questions a network scan cannot, which is the purpose of our IoT Penetration Test Services.

FAQ – Frequently Asked Questions

Is Mirai Still Active?

The original botnet was dismantled, but the released source code spawned a large family of descendants that remain among the most commonly observed malware on internet-exposed embedded devices. Modern variants add exploits for specific router and camera vulnerabilities rather than relying only on default passwords, and they are routinely rented out through booter services that anyone can hire for a small fee.

Does Rebooting a Device Remove Mirai?

It removes that infection, because Mirai lives only in memory and does not write itself to flash. The device is usually reinfected within minutes if the exposure that allowed the first compromise still exists, so a reboot is only useful alongside closing the management port, changing the credential, and applying firmware updates where the manufacturer still provides them.

What Does the UK PSTI Act Require of Device Makers?

Since 29 April 2024, consumer connectable products sold in the UK must not use universal default or easily guessable passwords, must publish a point of contact for reporting security issues, and must state the minimum period for which security updates will be provided. The duties apply to manufacturers, importers, and distributors, and the Office for Product Safety and Standards enforces them.

How Big Can an IoT Botnet Attack Be Now?

Considerably larger than in 2016. Mitigation providers have reported floods in the multi-terabit range and record-setting packet rates from compromised routers and cameras, and application-layer techniques such as the HTTP/2 Rapid Reset method allow enormous request volumes from comparatively few nodes. Capacity planning alone is no longer a viable defence; upstream filtering and provider-level mitigation are.

Related Terms

You May Be Interested In These

What Is Renovate?

Cybersecurity Terms

17 November 2026

What Is Renovate?

Read More
What Is Falco?

Cybersecurity Terms

17 November 2026

What Is Falco?

Read More
What Is Privilege Escalation?

Cybersecurity Terms

17 November 2026

What Is Privilege Escalation?

Read More