Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Is LoRaWAN Security?

LoRaWAN security covers the AES-128 key hierarchy, join procedures, and frame counters that protect long-range, low-power sensor networks used in metering, agriculture, and smart cities.

Illustration for the cybersecurity term LoRaWAN Security
Home / Blog / Cybersecurity Terms / What Is LoRaWAN Security?
17 November 2026

What Is LoRaWAN Security?

What Is LoRaWAN Security?

LoRaWAN is the networking layer built on the LoRa radio modulation, designed for devices that send a few bytes occasionally and must run on a battery for a decade. A sensor transmits to any gateway within range — several kilometres in open country, less in a city — and the gateway forwards the packet to a network server over IP. Water meters, soil probes, air quality monitors, parking bays, and building sensors all use it.

Security is built into the specification rather than bolted on, which is unusual in this field. Every payload is encrypted and every frame authenticated with AES-128 from the first version. The difficulties lie in key management, in the gap between specification versions, and in what the network server operator can see.

The Key Hierarchy

In LoRaWAN 1.0.x a device holds a single root key, the AppKey. Joining the network derives two session keys from it: the NwkSKey, which authenticates each frame with a message integrity code, and the AppSKey, which encrypts the payload. Because only the application server needs the AppSKey, end-to-end confidentiality from the network operator is possible — provided the keys are actually separated, which in many deployments they are not.

LoRaWAN 1.1, published in October 2017, split the root into a NwkKey and an AppKey held by different parties, introduced a dedicated Join Server, and expanded the network session keys into three with distinct roles for integrity, encryption of MAC commands, and forwarding. It also replaced the random DevNonce with a monotonically increasing counter and added a JoinNonce, closing the replay weaknesses described below.

Activation: OTAA Versus ABP

Over-the-Air Activation has the device perform a join exchange, deriving fresh session keys each time. Activation By Personalisation writes fixed session keys into the device at manufacture and never changes them. ABP is simpler, needs no join traffic, and is a poor idea: the same keys protect every message for the life of the device, and frame counters reset to zero on a power cycle, which opens the door to replay unless the network server handles it carefully. Use OTAA unless something genuinely prevents it.

Known Weaknesses in 1.0 Deployments

Deploying It Properly

  1. Use OTAA, and refuse ABP in procurement specifications.
  2. Generate a unique AppKey per device and store it in a secure element such as the ATECC608 variants designed for this purpose, so it never exists in readable flash.
  3. Run a Join Server you control, or use one whose key custody arrangements you have reviewed, and keep the application session key away from the network operator where confidentiality matters.
  4. Reject frame counter resets on the network server and alert on them, since a reset usually means either a faulty device or an attack.
  5. Choose 1.1-capable hardware for new deployments and plan the migration path for existing 1.0.x nodes.
  6. Monitor for missing uplinks. A sensor that goes quiet is the main signal you will get, so absence of data must raise an alert rather than simply leaving a gap in a chart.

Context for UK Deployments

LoRaWAN runs in the licence-exempt EU868 band in Britain, under the duty cycle limits Ofcom applies to short-range devices. That limit — commonly 1% — caps how often a node may transmit and therefore how quickly it can recover from interference, which belongs in your availability risk assessment. Where the sensors support metering, billing, or regulated infrastructure, the data they carry may also be personal data under UK GDPR, and consumption readings at fine granularity are revealing enough that the ICO’s expectations on minimisation apply.

At Privia Security, our IoT Penetration Test Services assess LoRaWAN nodes, gateways, and the server side together, including key extraction from sample devices.

FAQ – Frequently Asked Questions

Is LoRaWAN Traffic Encrypted End to End?

The payload is encrypted with the application session key, which in principle only the application server holds, so the network operator sees ciphertext. In practice many deployments run both servers on the same platform, so the separation is nominal. If end-to-end confidentiality matters, confirm who holds the application session key and insist on a Join Server arrangement that keeps it apart.

What Is the Difference Between OTAA and ABP?

Over-the-Air Activation performs a join exchange that derives fresh session keys, so keys change whenever the device rejoins. Activation By Personalisation hardcodes session keys at provisioning and never rotates them, which makes replay and long-term key compromise far more damaging. OTAA costs a little airtime at join and is the right default for almost every deployment.

Should I Upgrade from LoRaWAN 1.0.x to 1.1?

For new deployments, specify 1.1-capable devices and servers. For existing estates the upgrade usually means replacing hardware, so it is a refresh decision rather than a patch. In the meantime, mitigate the known 1.0 weaknesses: enforce OTAA, reject frame counter resets, keep a per-device root key, and monitor join traffic for repetition.

Can LoRaWAN Devices Be Jammed?

Yes. The modulation is resilient to noise but offers no protection against a determined transmitter in the same band, and duty cycle limits restrict how aggressively a node may retry. Treat availability as the weak property: design so that missing data triggers an alert, keep a second communication path for anything safety-related, and avoid using LoRaWAN for time-critical control.

Related Terms

You May Be Interested In These

What Is a Cloud Workload Protection Platform?

Cybersecurity Terms

17 November 2026

What Is a Cloud Workload Protection Platform?

Read More
What Is radare2?

Cybersecurity Terms

17 November 2026

What Is radare2?

Read More
What Is a PLC?

Cybersecurity Terms

17 November 2026

What Is a PLC?

Read More