Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
Industrial IoT connects sensors, controllers, and analytics platforms across factories, utilities, and logistics so that physical processes can be measured and optimised in near real time.

What Is Industrial IoT?
Industrial IoT, usually shortened to IIoT, is the use of networked sensors, controllers, and analytics platforms to measure and optimise physical industrial processes. A vibration sensor on a pump, a gateway that reads it over MQTT, and a cloud model that predicts bearing failure three weeks out together form an IIoT deployment. The commercial case is strong — unplanned downtime is expensive — and that is why the technology arrives in plants faster than the security arrangements around it.
Most designs follow the same shape. Sensors and actuators sit at the process edge, often alongside the PLCs that already control the plant. An edge gateway aggregates their data, converts between industrial protocols and modern ones, and sometimes runs local analytics. From there the data travels to a platform — AWS IoT, Azure IoT Hub, or a vendor’s own cloud — where it is stored, modelled, and fed to dashboards. Commands may flow back the other way, which is where the risk concentrates.
Common protocols include MQTT and AMQP for telemetry, OPC UA for structured machine data with built-in security, and the legacy industrial protocols beneath them: Modbus, PROFINET, EtherNet/IP, and DNP3. OPC UA can authenticate and encrypt; the legacy protocols almost never do.
Industrial networks were designed around the Purdue reference model, a hierarchy that separates enterprise IT at the top from process control at the bottom, with a demilitarised zone between them. IIoT routinely violates that hierarchy. A sensor at Level 0 or 1 may hold a direct outbound TLS connection to a vendor cloud, bypassing every layer in between. A supplier’s remote maintenance tunnel may terminate inside the control network. The result is a flat path from the internet to equipment that was never built to be reachable.
Three further characteristics make the environment unforgiving:
The Triton malware found at a Saudi petrochemical plant in 2017 targeted Schneider Electric Triconex safety instrumented systems — the controllers whose only job is to shut a process down safely. It is the clearest demonstration that attackers will go after the safety layer itself.
On 5 February 2021, an operator at the water treatment plant in Oldsmar, Florida watched a remote session move the sodium hydroxide setpoint from 100 to 11,100 parts per million. The access route was a shared TeamViewer installation with a password used across the site. In May 2021 the Colonial Pipeline ransomware incident never touched the OT network, yet the operator halted pipeline operations for five days because it could not bill accurately — a reminder that IT and OT consequences are not separable.
Operators of essential services in energy, water, transport, and digital infrastructure are regulated under the Network and Information Systems Regulations 2018 and assessed by their competent authority against the NCSC’s Cyber Assessment Framework. The CAF expects you to know what your connected assets are and to demonstrate control over them, which an unmanaged IIoT rollout makes very difficult to evidence. Manufacturers outside that regime still face contractual security requirements from customers and insurers.
Our OT-SCADA Penetration Test covers IIoT gateways and their cloud connections using methods agreed in advance with your engineering team, so process continuity comes first.
Consumer IoT optimises convenience and tolerates failure: a smart bulb that drops offline is an annoyance. Industrial IoT instruments production processes where downtime costs money and a wrong command can be dangerous. IIoT devices live longer, use industrial protocols, sit beside safety systems, and are governed by standards such as IEC 62443 rather than consumer regimes like the UK PSTI Act.
Yes, if the flow is one way and controlled. Push telemetry outbound through a single brokered gateway with mutual TLS, keep the data path separate from any command path, and require a human-approved workflow for commands returning to the plant. The risk is not analytics in the cloud; it is an inbound control channel that bypasses the network boundary nobody reviewed.
It covers them well at the system level. IEC 62443-3-3 defines system security requirements and security levels, and 62443-4-2 sets component requirements that apply to sensors, gateways, and embedded devices. The standard does not describe cloud platforms in detail, so most organisations pair it with cloud controls and the NCSC Cyber Assessment Framework for the regulated parts.
Start with passive traffic capture, configuration review, and architecture review, which carry no process risk. Test gateways, cloud APIs, and mobile interfaces fully, since they sit outside the process. Any active work against controllers happens in a replica or during an agreed maintenance window, with engineers present and a documented stop condition.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.