Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
PROFINET and EtherNet/IP carry factory automation over standard Ethernet without authentication by default, so an attacker on the same segment can rename, reset, or reprogram devices.

What Is PROFINET and EtherNet/IP Security?
PROFINET and EtherNet/IP are the two industrial Ethernet protocols that dominate factory automation. PROFINET, governed by PROFIBUS and PROFINET International, is the default in Siemens-centred plants across Europe. EtherNet/IP, governed by ODVA, carries the Common Industrial Protocol and is the default in Rockwell Automation environments. Both put real-time control traffic on the same cable as everything else, and both were designed on the assumption that the cable is inside a machine hall nobody hostile can reach.
PROFINET runs in three flavours. Acyclic configuration and diagnostics use ordinary TCP/IP and DCE/RPC. Real-time cyclic data bypasses the IP stack entirely, travelling as Layer 2 frames with EtherType 0x8892, which means it is not routable and not visible to anything inspecting IP. Isochronous real-time adds hardware-scheduled transmission for motion control with cycle times down to 31.25 microseconds. Device discovery and naming use the Discovery and Configuration Protocol, DCP, which is unauthenticated multicast.
EtherNet/IP splits differently. Explicit messaging — reading attributes, changing configuration, uploading or downloading a program — runs over TCP port 44818. Implicit I/O, the cyclic process data, runs over UDP port 2222 using CIP connections established by a Forward Open request. Device identity is available simply by asking: a List Identity request returns vendor, product code, revision, serial number, and product name.
Tooling is not exotic. Wireshark dissects both protocols fully, Scapy has PROFINET layers, Nmap’s enip-info script enumerates EtherNet/IP devices, and the research corpus from Project Basecamp in 2012 through Forescout’s OT:ICEFALL in June 2022 documents the rest.
Security is finally being added at protocol level, slowly. ODVA’s CIP Security brings TLS for explicit messaging and DTLS for implicit I/O, with X.509 device identity and optional data integrity or confidentiality; it requires devices and software that support it, which in most plants means a hardware refresh. PROFINET Security Classes take a staged approach: Class 1 covers device identity and hardened configuration, Class 2 adds cryptographic integrity protection for frames, and Class 3 adds confidentiality. Both arrive through new product generations, not firmware updates to installed equipment.
At Privia Security, our OT-SCADA Penetration Test assesses industrial Ethernet cells using passive capture and bench replication, with any active step agreed with your engineers first.
Acyclic TCP/IP traffic can. Real-time cyclic data cannot: it uses EtherType 0x8892 Layer 2 frames with no IP header, so it stays within the broadcast domain. That is a useful security property, because it means a correctly designed cell boundary already contains the most time-critical traffic without any additional control.
Where the equipment supports it, yes, particularly for explicit messaging between engineering workstations and controllers. The practical obstacle is coverage: a mixed estate will have devices that cannot participate, so CIP Security typically protects part of a cell while segmentation protects the rest. Plan it alongside hardware refresh cycles.
Putting the cell into its own VLAN with a single controlled path upward, then setting controller key switches to RUN. Together they remove remote reachability and remote reprogramming, which account for most realistic attack paths, and neither requires new hardware or a change to the control application.
Yes, provided the sensor is fed from a mirror port or TAP inside the same broadcast domain. Cyclic PROFINET frames and EtherNet/IP implicit I/O are both decodable, which lets a monitoring platform baseline the expected communication relationships and alert when a new pair appears or an existing one stops.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.