Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
Kismet is a passive wireless sniffer and intrusion detection system that discovers Wi-Fi, Bluetooth, and other radio devices without transmitting anything itself.

What Is Kismet?
Kismet is a wireless network detector, sniffer, and intrusion detection system that has been in continuous development since 2001. Its defining characteristic is that it listens without transmitting. It places an adapter in monitor mode and records every frame it hears, which means it finds networks that do not broadcast their name, clients that are searching for networks that are not present, and devices that no active scan would ever provoke into responding.
Modern versions go well beyond Wi-Fi. With appropriate capture hardware, Kismet handles Bluetooth and Bluetooth Low Energy, Zigbee and other 802.15.4 traffic, ADS-B aircraft transponders, and the large family of sub-GHz sensor protocols reachable through an RTL-SDR dongle. One sensor can therefore map most of what is transmitting in a building.
The architecture matters because it determines how Kismet is deployed in practice. The server performs analysis and provides a web interface; capture is handled by separate datasources that can run on remote hardware and feed back over the network. A low-cost single-board computer with a suitable adapter becomes a permanent sensor, and several of them give coverage across a site reporting into one console.
Everything is logged into a kismetdb database file, which can be replayed and re-analysed later, exported to PCAP for examination in Wireshark, or queried through a REST API. GPS tagging supports the walking surveys that produce a coverage map, and the web interface presents devices, their relationships, and alerts in real time.
Enterprise wireless controllers from the major vendors include rogue access point detection, and where one is deployed it should be configured and monitored. Kismet fills the gaps around it: sites too small for a controller, operational technology environments where the wireless estate is not managed by IT at all, buildings where the wireless infrastructure is a landlord’s, and the independent check that confirms what the controller reports.
A workable programme is straightforward. Establish a baseline of every access point and client that should be present, deploy sensors with sufficient coverage, alert on new access points advertising corporate SSIDs and on any device appearing on an unexpected channel, and review the alerts on a schedule rather than when something goes wrong. Walk the site periodically with a laptop, because fixed sensors miss what is in the car park.
The findings are often more mundane than exciting, and more useful for it. Forgotten access points still broadcasting from a decommissioned project, a WEP network serving a barcode system nobody realised was still in use, and a guest network bridged to the corporate VLAN by a configuration error are all common.
They are complementary rather than competing. Aircrack-ng is an assessment suite built around capture, injection, and key recovery, and its airodump-ng tool performs discovery as a means to that end. Kismet is a monitoring platform built for sustained operation: better at long-running passive collection, device tracking over time, multi-protocol coverage, and alerting. In an engagement, testers often run Kismet throughout to maintain situational awareness while using the Aircrack-ng tools for specific tests.
Because Kismet only receives, it raises none of the legal issues that transmitting does under the Wireless Telegraphy Act 2006, although section 48 of that Act still makes it an offence to intercept the content of a message not intended for you and disclose it. Recording that a device is present is not the same as reading what it sent.
At Privia Security, our Network Security Services include wireless surveys and rogue access point assessment across corporate and operational technology sites.
Not over the air, because it only receives and transmits nothing at all. A sensor on your own wired network is visible as a host like any other, but the wireless monitoring itself produces no radio emissions. This is also why it is well suited to environments where introducing additional transmissions would be unacceptable, such as hospitals and industrial sites.
A controller detects using the same access points that serve clients, so coverage follows your infrastructure and reporting is tied to one vendor. Kismet runs independent sensors, covers Bluetooth and sub-GHz protocols as well as Wi-Fi, and gives a second opinion. It is particularly useful in operational technology areas and leased buildings where IT does not control the wireless estate.
A wireless adapter supporting monitor mode, which most built-in laptop cards do not. External USB adapters based on Atheros or Realtek chipsets are the usual choice, with dual-band or tri-band support so that 5 GHz and 6 GHz networks are not missed. Bluetooth, Zigbee, and sub-GHz coverage each need their own capture device, and remote sensors run well on small single-board computers.
Because devices broadcast the names of networks they have previously connected to while searching for them. That list reveals where a device has been, which is a privacy exposure, and it tells an attacker exactly which network name a rogue access point should impersonate to attract that device. Modern operating systems have reduced this behaviour, but plenty of devices still do it.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.