Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Is EV Charging Station Security?

EV charging station security protects charge points, the OCPP link to their management system, and the payment and roaming platforms behind them, all of which sit on public pavements and private networks.

Illustration for the cybersecurity term EV Charging Station Security
Home / Blog / Cybersecurity Terms / What Is EV Charging Station Security?
17 November 2026

What Is EV Charging Station Security?

What Is EV Charging Station Security?

A public charge point is an unusual piece of equipment. It is a payment terminal, an internet-connected computer, and a controllable grid load, installed on a pavement where anyone can spend an hour with it unobserved. EV charging station security covers the charger itself, the Open Charge Point Protocol link to its management system, the back office that dispatches and bills, and the roaming arrangements that let one operator’s card work on another’s hardware.

OCPP and Where It Goes Wrong

Almost every charger speaks OCPP to a charge point management system. The widely deployed version, OCPP 1.6J, is JSON over WebSocket, and the specification leaves security to the deployment. In practice that has meant three recurring faults.

OCPP 2.0.1 addresses this properly with three security profiles, rising to mutual TLS with client certificates, plus signed firmware updates, security event logging, and a defined key management approach. The protocol is not the obstacle; deployment inertia is, because estates contain a decade of installed hardware.

The Rest of the Attack Surface

Payment and authorisation sit alongside. Many chargers still authorise with an RFID card presented to a reader, and where that card is a legacy proximity credential it is clonable in seconds, exactly as described under access card cloning. Contactless card payment brings the charger into PCI DSS scope. ISO 15118 Plug and Charge replaces both with certificate-based vehicle identity, which is better but introduces a public key infrastructure that the sector is still learning to operate.

Physical access is the forgotten part. Opening a kerbside enclosure frequently reveals an Ethernet port, a 4G router, a debug header, and a removable storage card holding configuration and credentials. Researchers at the Pwn2Own Automotive event in January 2024 demonstrated a long list of previously unknown vulnerabilities in home and commercial chargers from several major manufacturers within a few days, including authentication bypasses and remote code execution; the same event has repeated the result each year since. Separately, in 2022 several charge point displays in the United Kingdom showed offensive content after a third-party website embedded in their interface was altered, a reminder that the user interface is a supply chain too.

Why Grid People Pay Attention

A charger is a controllable load of between 7 kW and 350 kW. A back office that can start and stop thousands of them has an instrument for shifting demand, and coordinated manipulation of a large fleet is the same risk discussed under distributed energy resource security. With bidirectional charging arriving, the fleet becomes generation as well. This is why charge point security has been regulated as a grid matter in Great Britain rather than left to consumer product law alone.

The UK Rules

The Electric Vehicles (Smart Charge Points) Regulations 2021 applied from 30 December 2022 to charge points sold for private use in Great Britain. They require smart functionality and a default off-peak charging schedule, and they impose randomised delay of up to ten minutes so that a large population of chargers does not switch simultaneously after a supply event. The security requirements draw on ETSI EN 303 645: no universal default passwords, a published vulnerability disclosure policy, secure software updates with a stated support period, secure storage of credentials, and protection of personal data. Manufacturers must provide a statement of compliance, and enforcement sits with the Office for Product Safety and Standards.

Public charging has separate consumer rules on pricing transparency and reliability, and operators handling driver accounts and location history are controllers under UK GDPR with all that follows.

A Practical Checklist for Operators

  1. Move to OCPP 2.0.1 with security profile 3 for new estate, and enable TLS with proper certificate validation on existing OCPP 1.6 deployments using the security extensions.
  2. Give each charger a unique identity backed by a certificate, and reject management system connections that cannot prove it.
  3. Treat the back office as the crown jewel: multi-factor authentication for operators, authorisation controls on bulk commands, rate limiting, and alerting on mass firmware pushes.
  4. Sign firmware and verify it on the device through a proper signing chain with anti-rollback protection.
  5. Harden the enclosure: tamper detection, no accessible debug ports, encrypted storage, and no credentials recoverable from a removed card.
  6. Test the whole chain, including mobile and installer applications, which often hold higher privileges than the driver app.

At Privia Security, we test charge points, their management platforms, and their mobile applications through our IoT Penetration Test Services.

FAQ – Frequently Asked Questions

What Is OCPP and Why Does Its Version Matter?

The Open Charge Point Protocol is the standard link between a charger and its management system, carrying authorisation, transaction, meter, configuration, and firmware messages. Version 1.6J leaves security to the deployment and is frequently run without encryption or strong device identity. Version 2.0.1 defines security profiles up to mutual TLS, signed firmware, and security logging, which makes it the right target for new estates.

Can Someone Charge Their Car on My Account?

If authorisation relies on a clonable legacy RFID card, yes: the card is read in seconds and copied to a blank. Operators mitigate this with cryptographic credentials, app-based or Plug and Charge certificate authorisation, and back-office anomaly detection on impossible usage patterns such as the same token appearing in two cities within minutes.

Are Home Chargers Covered by UK Law?

Yes. The Electric Vehicles (Smart Charge Points) Regulations 2021 apply to charge points sold for private use in Great Britain from 30 December 2022, requiring smart functionality, default off-peak charging, randomised delay, and a set of security requirements drawn from ETSI EN 303 645. Manufacturers issue a statement of compliance and the Office for Product Safety and Standards enforces.

Why Is Randomised Delay a Security Feature?

Because synchronised behaviour across a large fleet is itself a grid risk. If every charger in a region resumes at the same instant after a supply interruption or a tariff boundary, the resulting demand step can destabilise the network. A randomised delay of up to ten minutes spreads that step, and it also limits the impact of a command issued to many chargers at once.

Related Terms

You May Be Interested In These

What Is Embedded System Security?

Cybersecurity Terms

17 November 2026

What Is Embedded System Security?

Read More
What Is Cross-Site Request Forgery (CSRF)?

Cybersecurity Terms

17 November 2026

What Is Cross-Site Request Forgery (CSRF)?

Read More
What Is Policy as Code?

Cybersecurity Terms

17 November 2026

What Is Policy as Code?

Read More