Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
BACnet security addresses the weaknesses of the building automation protocol defined in ASHRAE 135, which carries heating, ventilation, lighting, and lift commands with no authentication in its original form.

What Is BACnet Security?
BACnet is the protocol most large buildings speak. Standardised by ASHRAE as Standard 135 and published internationally as ISO 16484-5, it describes how controllers, sensors, air handling units, chillers, lighting panels, and supervisory workstations exchange information. If a UK office block has a building management head end, there is a good chance BACnet sits underneath it. BACnet security is the work of protecting that layer, which in its original form was designed with no authentication whatsoever.
BACnet models everything as objects with properties. A temperature sensor is an analogue input object; a fan is a binary output. Devices announce themselves with Who-Is and I-Am messages, and a client reads or writes properties with ReadProperty and WriteProperty. BACnet/IP carries this over UDP port 47808, usually with broadcast management devices stitching subnets together.
Nothing in that exchange proves who is asking. Anyone who can route a UDP packet to a controller can:
Several of these are privileged operations protected only by a password field that is commonly left at a default or blank value. Tools are not exotic: the Nmap bacnet-info script, open-source discovery tools, and a few lines of Python with a BACnet library are enough.
The protocol’s weaknesses would matter less if it stayed on an isolated field network. It does not. Internet-wide scanning consistently finds tens of thousands of BACnet devices answering on port 47808, including schools, hospitals, offices, and plant rooms, usually because a maintenance contractor needed remote access and a port forward was the quickest route. Security researchers have also published unauthenticated remote code execution flaws in widely deployed building controllers, including a vulnerability disclosed in 2021 in a major manufacturer’s building manager that gave root on the device. Once a controller is owned, the BACnet network behind it is open regardless of any firewall in front.
The consequences are not limited to discomfort. Data centre cooling, laboratory containment, hospital theatre pressure cascades, pharmaceutical clean rooms, and cold storage all run on this plant, and the building management system is frequently the softest route into a corporate network as well.
The standards body’s answer arrived as Addendum 135-2020bj, known as BACnet/SC. It replaces the UDP datagram model with WebSocket connections over TLS 1.3, authenticated with X.509 certificates issued to each device, arranged in a hub-and-spoke or mesh topology. Broadcasts are handled by the hub rather than by the network, which also removes the BACnet broadcast management device headaches that have plagued multi-subnet deployments.
BACnet/SC is the correct destination, and new tenders should require it. It is also a migration rather than a switch: it needs devices that support it, a certificate lifecycle that a facilities team can actually operate, and gateways for the legacy controllers that will remain in service for another decade.
At Privia Security, we review building automation networks and their supervisory platforms as part of our Infrastructure and Architecture Review Services.
The original protocol has essentially none: no authentication of the sender, no integrity protection, and no encryption. A password field exists for a handful of privileged services and is weak and often unset. The modern answer is BACnet Secure Connect, added by Addendum 135-2020bj, which carries BACnet over TLS 1.3 WebSocket connections with per-device certificates.
Prefer passive capture on a span port or network tap, which will reveal the devices simply by listening to routine polling. If active discovery is necessary, a single Who-Is broadcast is far gentler than a port scan, and should be run outside critical periods. Some older controllers respond badly to aggressive scanning and can drop off the bus entirely.
BACnet output objects accept commands at sixteen priority levels so that safety and manual overrides outrank normal control logic. An attacker who writes at a high priority can hold a valve, damper, or fan in a chosen state, and operator commands at normal priority will appear to be accepted while changing nothing. Monitoring for unexpected high-priority writes is one of the most useful BACnet detections.
Yes, for new builds and major refurbishments, where the cost of requiring it is close to zero and the alternative is another fifteen years of unauthenticated traffic. For existing estates, plan it as a programme alongside controller replacement, and in the meantime use network segmentation, removal of internet exposure, and monitoring as the interim controls.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.