Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Are Lock Picking and Door Bypass Techniques?

Lock picking and door bypass are the methods a physical penetration tester uses to pass a door without a key, and in practice the bypass is almost always faster than the pick.

Illustration for the cybersecurity term Lock Picking and Door Bypass
Home / Blog / Cybersecurity Terms / What Are Lock Picking and Door Bypass Techniques?
17 November 2026

What Are Lock Picking and Door Bypass Techniques?

What Are Lock Picking and Door Bypass Techniques?

Physical penetration testing exists because network controls stop at the building line. A tester who gets inside reaches unattended workstations, comms cabinets, printers with stored credentials, spare network ports, and the meeting room whiteboard. Doors are the control being tested, and the vocabulary for defeating them divides into two families: manipulating the lock, and ignoring it.

The second is the one that matters. Lock picking is a slow, skilled, conspicuous activity performed kneeling in a corridor. Bypass is usually a few seconds standing up.

Manipulating the Lock

Ignoring the Lock

Most engagements never get as far as the pick set.

  1. Under-door tools. A hooked wire on a flexible shaft passed through the gap beneath an inward-opening door, used to pull the handle on the far side. On a door with a lever handle and a 10 millimetre gap, this takes seconds.
  2. Latch slipping. A shim or card worked between frame and door to depress a sprung latch that has no deadlocking feature.
  3. Request-to-exit sensor attacks. Access-controlled doors usually release automatically when a passive infrared sensor inside detects someone approaching. Spraying compressed air or inert gas through the gap, or waving a thin material through a mail slot, triggers it from outside.
  4. Door gap tools and levering. Spreading a frame or reaching a crash bar from outside on poorly fitted doors.
  5. Cylinder snapping. Breaking a Euro profile cylinder at its weak point, a technique widely used in domestic burglary in the United Kingdom and the reason anti-snap standards exist.
  6. Going around. Suspended ceilings above a partition wall, service risers, roller shutters, windows, fire escapes propped open for a smoking break, and the loading bay that is open all afternoon.

And the simplest of all: following someone through. Tailgating defeats every lock on the site and is rarely challenged, which is why it pairs so naturally with access card cloning and a plausible badge.

The Law in the United Kingdom

Possession of lock picks is not in itself an offence in England and Wales, but section 25 of the Theft Act 1968 makes it an offence to go equipped for burglary, theft, or cheat, and intent is what the prosecution must establish. Scotland has a stricter position under the Civic Government (Scotland) Act 1982, which places the burden on the person found with the tools to account for them.

The practical consequence for a tester is procedural. Every physical engagement runs under a written authorisation that names the sites, the dates and times, the techniques permitted, what may and may not be damaged, and a client contact reachable at 03:00 who can confirm the activity to a police officer or a security guard. The tester carries that letter physically. Teams that treat this as paperwork discover its value exactly once.

What Actually Resists

Hardware ratings matter, and in the United Kingdom they are specific. BS 3621 covers thief-resistant locks for final exit doors. TS 007 three-star rating, or a one-star cylinder with two-star security hardware, addresses cylinder snapping. PAS 24 covers complete doorsets, and the LPS 1175 scale rates how long a doorset resists a defined toolkit and attacker. The Secured by Design scheme ties these together for new build.

Hardware alone is not the answer. The controls that defeat the bypass list above are mostly configuration and behaviour: deadlocking latches, door gap reduction, shielding the request-to-exit sensor from the gap, door position switches and forced-door alarms wired into the access control system and genuinely monitored, anti-tailgating turnstiles or interlocks on sensitive entrances, and a guard force that responds to alarms rather than acknowledging them. Walls that stop at the ceiling tiles need attention, and so does key control, which in most organisations is a cupboard and an honour system.

None of this is separate from network security. Reaching a comms room is reaching the network, which is the practical content of physical-cyber convergence, and it is why physical entry belongs in a Red Team scenario rather than in a separate annual survey.

At Privia Security, physical entry and badge testing form part of our Red Team Services.

FAQ – Frequently Asked Questions

Is It Legal to Own Lock Picks in the UK?

In England and Wales, possession alone is not an offence, but section 25 of the Theft Act 1968 criminalises going equipped for burglary, theft, or cheat, so intent and circumstances decide the matter. Scotland takes a stricter line under the Civic Government (Scotland) Act 1982. Professional testers carry written authorisation naming sites, dates, and techniques for exactly this reason.

Do Testers Actually Pick Locks Very Often?

Rarely. Picking is slow, requires skill, and leaves the tester kneeling in a corridor. Bypass techniques are faster and quieter: under-door tools, latch slipping, triggering the exit sensor from outside, and simply following an employee through a door. Most engagements succeed through a combination of tailgating and an unsecured secondary entrance.

What Is a Request-to-Exit Attack?

Access-controlled doors usually release automatically when a sensor inside detects someone leaving, so that nobody is trapped. If that sensor can be triggered from outside, by spraying compressed air under the door or passing something through a gap or letterbox, the door opens with no credential at all. Repositioning and shielding the sensor is the fix.

Which UK Standards Should I Specify for Doors?

BS 3621 for thief-resistant locks on final exit doors, TS 007 three-star for cylinder snap resistance, PAS 24 for complete doorsets, and LPS 1175 where a rated resistance time against a defined toolkit is required. Secured by Design brings them together for new build. Specify the doorset rather than the lock, because the weakest component sets the result.

Related Terms

You May Be Interested In These

What Is a SYN Flood Attack?

Cybersecurity Terms

17 November 2026

What Is a SYN Flood Attack?

Read More
What Is Data Poisoning?

Cybersecurity Terms

17 November 2026

What Is Data Poisoning?

Read More
What Is an Air Gap?

Cybersecurity Terms

17 November 2026

What Is an Air Gap?

Read More