Explore our new Cybersecurity Terms Glossary, explained by our experts.
Cybersecurity Terms Glossary
Safety protects people and the environment from the system; security protects the system from people. The disciplines share equipment and vocabulary but assume entirely different kinds of failure.

What Is the Difference Between Safety and Security?
English conveniently blurs the two words; most industrial languages do not. The distinction is simple to state and consequential to get wrong. Safety protects people, the environment, and equipment from the system. Security protects the system from people. A pressure relief valve is a safety control. A locked cabinet around the controller that opens it is a security control. They meet on the same skid and answer to different engineering traditions.
| Safety | Security | |
|---|---|---|
| Source of harm | Random hardware failure, systematic design error, human error | A deliberate, adaptive adversary |
| Mathematics | Probability; failure rates are measurable and stable | No meaningful probability; the attacker chooses the moment |
| Independence | Failures are assumed independent unless shown otherwise | An attacker will deliberately defeat several layers at once |
| Design response | Redundancy, diversity, fail-safe states, proof testing | Segmentation, authentication, monitoring, patching |
| Core standards | IEC 61508, IEC 61511, EN 50126 in rail | IEC 62443, ISO 27001, the NCSC Cyber Assessment Framework |
| Change philosophy | Change is risk; prove it before you touch it | Not changing is risk; the environment moves under you |
That last row is where real projects grind. A safety engineer has been trained that an unmodified, certified, well-understood system is the safest system. A security engineer knows that an unpatched system becomes more dangerous every month. Both are correct within their own frame, and neither can win the argument by restating it.
Safety analysis assumes failures do not conspire. A safety integrity level calculation combines failure rates on the assumption that two independent devices will not fail at the same instant for the same reason. An attacker is precisely a common cause: one compromised engineering workstation can alter the basic process control system and the protective function, defeating a layered design that looked sound on paper.
Triton, found at a petrochemical plant in Saudi Arabia in 2017, is the case study. The malware targeted Schneider Electric Triconex safety-instrumented systems, reaching them through an engineering workstation, and attempted to reprogram the controllers. The attack was discovered because it tripped the plant, which is a safety system working as designed, but the intent was to disable the last line of protection before causing a process upset. No probabilistic model would have assigned that scenario a number.
The practical method is a combined assessment rather than two documents written separately. Run the HAZOP and layer-of-protection analysis as usual, then ask of each protection layer who could defeat it deliberately and from where — the approach usually marketed as a cyber-informed process hazard analysis, and formalised by the risk assessment process in IEC 62443-3-2. The output assigns a target security level to each zone based on the physical consequence, which is the point at which the two disciplines finally share a unit of measure.
Organisationally, give the safety and security functions a single escalation route and a shared change board. In the UK, upper-tier COMAH sites must address both in the safety report, and the Health and Safety Executive has been explicit that cybersecurity is in scope of a major accident hazard assessment. Operators of essential services face the parallel expectation through the NIS Regulations 2018. Neither regulator accepts a security position that ignores process consequence, or a safety case that assumes the attacker does not exist.
At Privia Security, our Cyber Risk Analysis Services run this combined assessment with your process safety team in the room.
Most security controls sit around the safety system rather than inside it: network separation, restricting the engineering workstation, controlling the key switch, and monitoring the conduit. None of those alters the certified function. Changes to the safety application itself go through the IEC 61511 management-of-change process and may require revalidation before the plant restarts.
No. A safety integrity level describes the probability that a protective function performs on demand, assuming random and systematic failures. It says nothing about resistance to a deliberate attacker. A SIL 3 function reached from a compromised engineering workstation offers no protection at all, which is precisely what Triton demonstrated.
Neither alone. The workable arrangement gives a named OT security owner accountability, places them inside the engineering organisation so they inherit its safety culture, and connects them to the corporate security function for tooling, monitoring, and incident response. What matters most is a single change board where both perspectives are present.
A hazard study that keeps the standard HAZOP structure but adds a deliberate-act perspective to each deviation: could an attacker cause this condition, which systems would they need, and does the protection layer depend on the same equipment. It produces security requirements expressed in process consequence terms, which is the language plant management already uses.
You May Be Interested In These
We use a few cookies that are needed to make this website work, and they are always on. We would also like to set analytics cookies, to see which pages are useful; functional cookies, so that our live chat works; and advertising cookies, to measure our campaigns. We will not set any of those until you say yes, and you can change your mind at any time from the Cookie Settings link in the footer.
Choose the cookies you are happy for us to use. Strictly necessary cookies are always on; everything else is off until you turn it on.
These cookies keep the website working: they hold your security checks, your form submissions and the choice you make here. The site cannot run without them, so they are always on.
These let our live chat open and remember your conversation, and let the newsletter sign-up work. Switch them off and the chat window will not appear.
These tell us which pages are read and how people find us, so that we can improve the site. The reports are about groups of visitors, never about you personally.
These let us measure our advertising and show you our adverts on other websites, such as LinkedIn, Google and Meta. Switch them off and you will still see adverts, but they will be less relevant.