Explore our new Cybersecurity Terms Glossary, explained by our experts.

View the Glossary View the Glossary
PRIVIA

Cybersecurity Terms Glossary

What Is SCADA Security?

SCADA security protects supervisory control and data acquisition systems, which monitor and control geographically spread industrial assets such as power grids, pipelines, and water networks.

Illustration for the cybersecurity term SCADA Security
Home / Blog / Cybersecurity Terms / What Is SCADA Security?
17 November 2026

What Is SCADA Security?

What Is SCADA Security?

SCADA security is the protection of supervisory control and data acquisition (SCADA) systems, the platforms that let operators monitor and control industrial processes spread over large areas. Electricity transmission and distribution, gas pipelines, water and wastewater networks, railways, and oil fields all depend on SCADA to collect readings from remote sites and send commands back to equipment.

SCADA is one part of the wider world of operational technology. Its distinctive feature is distance: a control room may supervise hundreds of substations or pumping stations, connected over radio, cellular, leased lines, or the internet. Every one of those connections is a potential entry point.

How a SCADA System Works

A typical SCADA architecture includes:

Why SCADA Is Hard to Secure

Many SCADA systems were designed decades ago for closed networks where security was not a concern. Several characteristics still create risk:

Notable Attacks

SCADA has been the target of some of the most significant cyberattacks on record. In December 2015, attackers used compromised SCADA systems to open breakers at Ukrainian distribution companies, leaving around 225,000 customers without power. A year later, the Industroyer malware (also called CrashOverride) caused an outage in Kyiv by speaking industrial protocols directly to grid equipment, and a new version, Industroyer2, was found in 2022. In 2024, Western agencies including the NCSC warned that the Volt Typhoon group had pre-positioned itself in critical infrastructure networks, apparently to enable disruption in a future crisis.

Key Security Controls

Defending SCADA requires approaches adapted to industrial realities:

  1. Segmentation and a DMZ between corporate IT and SCADA networks, with no direct connections and tightly controlled conduits, following IEC 62443 zones and conduits (network segmentation).
  2. Secure remote access through a single, monitored gateway with multi-factor authentication, approval workflows, and session recording.
  3. Asset inventory built with passive monitoring tools that do not disturb fragile devices.
  4. Protocol-aware monitoring that understands DNP3, Modbus, and IEC 104 and can spot unauthorised commands or controller programming.
  5. Hardening of HMIs, servers, and engineering workstations, with application allow-listing and removable media controls.
  6. Secure protocol options where available, such as DNP3 Secure Authentication and OPC UA with encryption.
  7. Backups of controller logic and configurations, stored offline and tested.
  8. Joint incident response plans that include manual operation procedures.

Assessing SCADA Risk

A risk assessment for SCADA must consider safety and physical consequences as well as data loss. Testing must be handled with great care: passive analysis, configuration reviews, architecture reviews, and testing in replica environments are preferred over active scanning of live controllers, which can cause some older devices to crash.

Regulation in the UK

UK operators in energy, water, and transport are typically designated as operators of essential services under the NIS Regulations 2018. Their competent authorities, such as Ofgem and the Drinking Water Inspectorate, assess them against the NCSC’s Cyber Assessment Framework, which expects demonstrable control over the systems that support essential functions.

At Privia Security, our OT-SCADA Penetration Test evaluates SCADA environments using safe, carefully agreed methods that put the continuity of your operations first.

FAQ – Frequently Asked Questions

What Is the Difference Between SCADA and a PLC?

A PLC is a ruggedised computer that controls a specific piece of equipment or process locally, such as a pump or production line. SCADA is the supervisory layer that gathers data from many PLCs and remote terminal units across sites and lets operators monitor and control them from a central location. SCADA depends on PLCs, but they are not the same thing.

Is SCADA Still Air-Gapped?

Rarely in practice. Most SCADA networks now connect to corporate systems, cloud analytics, vendor support portals, or remote sites over public networks. Even networks described as air-gapped are often bridged by USB drives, laptops, or forgotten links. Security should assume connectivity exists and control it carefully rather than relying on isolation alone.

Can SCADA Systems Be Penetration Tested Safely?

Yes, with the right approach. Testers rely on passive traffic analysis, configuration and architecture reviews, and testing in replica or offline environments. Any active testing on live systems is agreed with engineers in advance, carried out during maintenance windows, and stopped immediately if a process behaves unexpectedly. Safety always comes before coverage.

Related Terms

You May Be Interested In These

What Is an Incident Response Plan?

Cybersecurity Terms

17 November 2026

What Is an Incident Response Plan?

Read More
What Is KAPE?

Cybersecurity Terms

17 November 2026

What Is KAPE?

Read More
What Is Operational Technology (OT) Security?

Cybersecurity Terms

17 November 2026

What Is Operational Technology (OT) Security?

Read More